i want to ask what brand chip you are using on g60

i tried several sns tuning and didnt like it , i now have one from german ebay thats okay

my car has the grey fuel injectors and 68 pulley

The majority of us use either the Jabba (but enriched too much ) or the Oettinger (tests carried out by Yangra ) ... for the others we don’t really know ... Sls and others .

And i had , grey injectors , big intercooler and 70mm pulley with Jabba chip .

What is your pressure , at your charger at 4500 rpm or more ? ( on hidden mode or gauge ) .

yes ive tried jabba...not good

where can i read about oettinger , ive never seen them for sale

i also hear jd engineering are good

best i can get is about 1 bar boost

Why the Jabba was not good ? bad enrichment ? .

For the Oettingers, we can have but copies .

I know JD enjineering , but don’t know what they’re worth ... after there’s the Sls , Bartek and Co chips .

steveo3002 écrit:
For an original G60 and a 68mm pulley , this is more than respectable .

May be that you will have to think of the sensor 250KPa ( 1.5 Pressure Bars ) ... the limit is 1 Bars-1.1 Bars on the original sensor ... this affects the mapping .

i think the jabba was rich and badly spoken about within enthusiasts , they also gave me very bad customer service so keen to never use them again

how much does oettinger ones cost ? does someone in the forum make copies i have an sns one i could share

steveo3002 écrit:
You should know that the Jabba and Oettinger chips have very similar maps ... and if you don’t like the Jabba/has heard of it in evil ... the Oettinger may be the same .

I keep looking for which member could provide you with a copy of Oettinger ... but I think given what you’re looking for, two things are needed .

Either you want to have the "summum", namely a custom mapping ... or have a chip (but that would be more adapted to your setup ) ... than Jabba or Oettinger's chips .

steveo3002 écrit:
We have one member on the forum , who have the JD engineering chip ( Obimaster ) ... But I don’t know what it’s worth ... after you’ve heard it well , it might be an opportunity to try ... even if I prefer reprogramming .

And if you want to see other topics on G preparation :


techniqueg60.com/ind...ration-du-moteur-g60

I have an Oettinger chip, (not into the car at moment) so if someone can copy this mapping, i can provide it to...